Products >> Panel Coker (Panel coking apparatus)

Panel Coker (Panel coking apparatus)

Panel Coker (Panel coking apparatus)

The panel coking apparatus to determine the tendencies of finished oils from coke when in contact with surfaces at elevated temperatures. It is designed to perform Fed. Test Standard 791 method 3462.

  • The unit is supplied with PID temperature indicating controllers for regulating the temperature of the test panel oil in the sump and air. It is equipped with a variable drive motor, digital speed display and air flow regulator system.
  • The optional Cyclic timing system allows for alternate splash/bake cycles to allow oil bake for a period of time on the hot panel without the addition of fresh lubricants. The optional sulphur dioxide gas system allows for the introduction of a corrosive acidic atmosphere thus increasing the severity of the evaluation.

PANEL COKING APPARATUS COMPRISES OF | Accessories

Panel Coking Apparatus Comprises of:
Speed Ten turn variable speed control pot. Speed range from 100 to 2500 rpm.
Temperature Three Heating System
Panel 540 Degree Celsius ( 1000 Degree F ) Maximum
Sump 300 Degree Celsius ( 572 Degree F) maximum
Air 40 Degree Celsius ( 104 Degree F) Maximum
Atmospheres Variable airflow or other inert gases from 0.2 to 1.0 liters per minute is standard. Optional Acidic Atmosphere Chamber and Delivery System is available to supply and monitor corrosive sulphur dioxide ( SO2) atmospheres in various concentrations.
Timing System Timer with automatic shut down. Optional cyclic timing system for alternating/bake cycles.
Acidic Atmosphere Chamber and Delivery System Optional system to introduce and monitor corrosive Sulphur Dioxide ( SO2 ) atmosphere.
Motor 1/18 HP
Power 220/110 V Single Phase 50/60 Cycles 20 amps
Includes On/Off Timer Variable Speed Motor Air Flow Regulator PID Electronic Temperature Controllers Lubricant Delivery System
Accessories
  • Cyclic Timing System: Allows for alternating splash/bake cycle.
  • Sulphur Dioxide Gas Supply System
  • Sealed chamber and SO2 delivery system to introduce and monitor corrosive acidic atmospheres. Includes acid monitoring meter.
  • Specimen Test Panels: 3-7/16 x 1 1/4 x 1 1/4 inch test panel available in various materials.
  • B1 Soft Aluminum, 3003-F
  • B2 Aluminum 2024-T351 (QQ-A-355)
  • C Cold Rolled Steel
  • D Type 321 Stainless Steel (Other materials available upon request)
Tribology Tribotesters & Tribotesting,Wear,additive lubricity & additive screening,additives friction & lubricity additives, fuels and lubricants,Biodiesel & Scar dia,weld load & STLE-ASME-NLGI,wear properties & ball on cylinder,block on ring-crossed cylinder,extreme pressure properties & friction coefficient,load carrying capacity,scuffing dry contact conditions,self-lubricating materials & wear measurement,elastohydrodynamic lubrication gearbox lubricants & hypoid gear lubricants,rolling,slide/roll,spin,spur gears,anti-wear properties,boundary lubrication,coatings,contact resistance measurement,crankcase lubricants,dynamic friction,electrical contact lubrication,ferrous materials,films,hertzian contact,mixed lubrication,quality control testing, screening of lubricants,surface treatments,adhesive wear,diesel fuel lubricity,fuel lubricity,Four Ball Testers & Fourball testers,Four ball EP tester & Fourball EP tester,Four Ball Wear tester,Fourball wear tester,4 ball ep tester & 4 ball wear tester,4ball wear tester & 4ball tester,ASTM D4172 & ASTM D2266,ASTM D2783 & ASTM D2596,ASTM D5183 & IP 239-ASTM D217 ASTM Grease working machine & ASTM Grease worker, Scratch testers,Penetrometers,Penetration,R&D,Research & Development,laboratories,R&D labs,Refineries,Tribology labs,Engineering,metalworking fluids,ILMA,coefficient of friction,Material testing,Test equipment,Testing equipment,Independent testing laboratories,Multispecimen test machine,CEC F-06-A-96 Measurement of Diesel Fuel Lubricity,ASTM D6079-97 Standard Test Method for evaluating Lubricity of Diesel Fuels, ISO 450 Diesel Fuel-Assessment of lubricity using the High Frequency reciprocating test rig,ISO 12156-1 1997 Diesel Fuel-Assessment of lubricity using the High Frequency reciprocating test ,rig EN 590 1999 Fuels- Diesel requirements & test procedures,ASTM D5706 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency Linear-Oscillation Test Machine, ASTM D5707 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease using a High-Frequency Linear-Oscillation Test Machine,DIN 51834-1&2 Tribological tests in the translatory oscillation apparatus Part 1&2 Determination of friction and wear data for lubricating oils, Triboinnovators,OFT,Multispecimen machine,multi-specimen machine.,

What We Offer

Technologies & Methodologies

Four Ball test m/c
Reciprocatory Friction Motor
Tapping Torque Tester
Low Temperature Torque Test Rig
High Temperature Grease Tester
Shear Stability Tester
High Frequency Reciprocating Rig
MultiSpecimen Test m/c
Two Roller rolling sliding Tester.
Journal Bearing Fatigue Tester.
Friction and Wear monitor
Pin on Disc test m/c
Panel Coking apparatus
Reichert Type Tester.

Our Locations

Whatsapp & Voice Number : +91-9810377557
Email : tribosys@gmail.com