Menu
Panel Coker (Panel Coking Apparatus)
- The panel coking apparatus to determine the tendencies of finished oils from coke when in contact with surfaces at elevated temperatures. It is designed to perform Fed. Test Standard 791 method 3462.
- The unit is supplied with PID temperature indicating controllers for regulating the temperature of the test panel oil in the sump and air. It is equipped with a variable drive motor, digital speed display, and airflow regulator system.
- The optional Cyclic timing system allows for alternate splash/bake cycles to allow oil to bake for a period of time on the hot panel without the addition of fresh lubricants. The optional sulfur dioxide gas system allows for the introduction of a corrosive acidic atmosphere thus increasing the severity of the evaluation.
| Panel Coking Apparatus Comprises of: |
| Speed | Ten turn variable speed control pot. Speed range from 100 to 2500 rpm. |
| Temperature | Three Heating System |
| Panel | 540 Degree Celsius ( 1000 Degree F ) Maximum |
| Sump | 300 Degree Celsius ( 572 Degree F) maximum |
| Air | 40 Degree Celsius ( 104 Degree F) Maximum |
| Atmospheres | Variable airflow or other inert gases from 0.2 to 1.0 liters per minute is standard. Optional Acidic Atmosphere Chamber and Delivery System is available to supply and monitor corrosive sulphur dioxide ( SO2) atmospheres in various concentrations. |
| Timing System | Timer with automatic shut down. Optional cyclic timing system for alternating/bake cycles. |
| Acidic Atmosphere Chamber and Delivery System | Optional system to introduce and monitor corrosive Sulphur Dioxide ( SO2 ) atmosphere. |
| Motor | 1/18 HP |
| Power | 220/110 V Single Phase 50/60 Cycles 20 amps |
| Includes | On/Off Timer Variable Speed Motor Air Flow Regulator PID Electronic Temperature Controllers Lubricant Delivery System |
OFT (Oscillation Friction & Wear Test Rig): STANDARDS |
Cyclic Timing System: Allows for alternating splash/bake cycle.
Sulphur Dioxide Gas Supply System
Sealed chamber and SO2 delivery system to introduce and monitor corrosive acidic atmospheres. Includes acid monitoring meter.
Specimen Test Panels: 3-7/16 x 1 1/4 x 1 1/4 inch test panels available in various materials.
- B1 Soft Aluminum, 3003-F
- B2 Aluminum 2024-T351 (QQ-A-355)
- C Cold Rolled Steel
- D Type 321 Stainless Steel (Other materials available upon request)
